Distribution Coeffecient without concentrationsStandard solution and extracted solution : same...
Is the UK legally prevented from having another referendum on Brexit?
How do I fight with Heavy Armor as a Wizard with Tenser's Transformation?
In the Lost in Space intro why was Dr. Smith actor listed as a special guest star?
Is layered encryption more secure than long passwords?
Can you prevent a man in the middle from reading the message?
Dealing with an internal ScriptKiddie
Is it really OK to use "because of"?
How to deal with an underperforming subordinate?
Minimum Viable Product for RTS game?
Can I use a single resistor for multiple LED with different +ve sources?
Why can all solutions to the simple harmonic motion equation be written in terms of sines and cosines?
Why does a single AND gate need 60 transistors?
Why do single electrical receptacles exist?
How do I avoid the "chosen hero" feeling?
Disk space full during insert, what happens?
Why did Ylvis use "go" instead of "say" in phrases like "Dog goes 'woof'"?
Tikz: Perpendicular FROM a line
Color of alien seas
Running away from a conflict
How bad is a Computer Science course that doesn't teach Design Patterns?
Boss asked me to sign a resignation paper without a date on it along with my new contract
Sing Baby Shark
Renting a 2CV in France
Process substitution inside a subshell to set a variable
Distribution Coeffecient without concentrations
Standard solution and extracted solution : same concentration?Equilibrium Concentrations of Products/Reactantssolution concentrationsSolubility of Gold in low concentrationsHow to determine the mole fraction of the liquid phase from a given mole fraction of the vapour phase for a benzene/toluene mixture?Chemical Reagent Test sensitive at low concentrationsHow to find pH of an aqueous ammonia solution at high pressures?Increasing partition coefficient in an extractionWhy do my equilibrium calculations on this HF/NH4OH buffer system not match those in literature?How to without calculations understand the liquid-liquid extraction efficiency?
$begingroup$
From what I understand about distribution coefficient is straight from my book-- which does NOT give any practice examples-- is that:
D= CA(ext) ÷ CA(orig)
where CA(ext) and CA(orig) represent the total concentration of all analyte species present in the two phases regardless of chemical state. Below is a homework problem that I'm try to solve, but having no luck, since I'm not given any concentrations, only weight and volume.
In an extraction experiment, it is found that 0.0376 g of an analyte are extracted into 50 mL of solvent from 150 mL of a water sample. If there was originally 0.192 g of analyte in this volume of the water sample, what is the distribution coefficient?
The answer for this problem is 0.731%, but no matter which way I plug in the numbers that are given do I reach this answer. Any ideas on what I'm missing?
equilibrium solutions analytical-chemistry extraction
edited 1 hour ago
andselisk
16.6k654115
asked 2 hours ago
Molly HahnMolly Hahn
113
New contributor
Molly Hahn is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
$endgroup$
add a comment |
$begingroup$
From what I understand about distribution coefficient is straight from my book-- which does NOT give any practice examples-- is that:
D= CA(ext) ÷ CA(orig)
where CA(ext) and CA(orig) represent the total concentration of all analyte species present in the two phases regardless of chemical state. Below is a homework problem that I'm try to solve, but having no luck, since I'm not given any concentrations, only weight and volume.
In an extraction experiment, it is found that 0.0376 g of an analyte are extracted into 50 mL of solvent from 150 mL of a water sample. If there was originally 0.192 g of analyte in this volume of the water sample, what is the distribution coefficient?
The answer for this problem is 0.731%, but no matter which way I plug in the numbers that are given do I reach this answer. Any ideas on what I'm missing?
equilibrium solutions analytical-chemistry extraction
edited 1 hour ago
andselisk
16.6k654115
asked 2 hours ago
Molly HahnMolly Hahn
113
New contributor
Molly Hahn is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
$endgroup$
add a comment |
$begingroup$
From what I understand about distribution coefficient is straight from my book-- which does NOT give any practice examples-- is that:
D= CA(ext) ÷ CA(orig)
where CA(ext) and CA(orig) represent the total concentration of all analyte species present in the two phases regardless of chemical state. Below is a homework problem that I'm try to solve, but having no luck, since I'm not given any concentrations, only weight and volume.
In an extraction experiment, it is found that 0.0376 g of an analyte are extracted into 50 mL of solvent from 150 mL of a water sample. If there was originally 0.192 g of analyte in this volume of the water sample, what is the distribution coefficient?
The answer for this problem is 0.731%, but no matter which way I plug in the numbers that are given do I reach this answer. Any ideas on what I'm missing?
equilibrium solutions analytical-chemistry extraction
edited 1 hour ago
andselisk
16.6k654115
asked 2 hours ago
Molly HahnMolly Hahn
113
New contributor
Molly Hahn is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
$endgroup$
From what I understand about distribution coefficient is straight from my book-- which does NOT give any practice examples-- is that:
D= CA(ext) ÷ CA(orig)
where CA(ext) and CA(orig) represent the total concentration of all analyte species present in the two phases regardless of chemical state. Below is a homework problem that I'm try to solve, but having no luck, since I'm not given any concentrations, only weight and volume.
In an extraction experiment, it is found that 0.0376 g of an analyte are extracted into 50 mL of solvent from 150 mL of a water sample. If there was originally 0.192 g of analyte in this volume of the water sample, what is the distribution coefficient?
The answer for this problem is 0.731%, but no matter which way I plug in the numbers that are given do I reach this answer. Any ideas on what I'm missing?
equilibrium solutions analytical-chemistry extraction
equilibrium solutions analytical-chemistry extraction
edited 1 hour ago
andselisk
16.6k654115
asked 2 hours ago
Molly HahnMolly Hahn
113
New contributor
Molly Hahn is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
edited 1 hour ago
andselisk
16.6k654115
asked 2 hours ago
Molly HahnMolly Hahn
113
New contributor
Molly Hahn is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
edited 1 hour ago
andselisk
16.6k654115
edited 1 hour ago
andselisk
16.6k654115
edited 1 hour ago
andselisk
16.6k654115
16.6k654115
asked 2 hours ago
Molly HahnMolly Hahn
113
New contributor
Molly Hahn is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
asked 2 hours ago
Molly HahnMolly Hahn
113
asked 2 hours ago
Molly HahnMolly Hahn
113
113
New contributor
Molly Hahn is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
New contributor
Molly Hahn is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
Molly Hahn is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |
add a comment |
1 Answer
1
active
oldest
votes
$begingroup$
Molar concentration can be expressed via mass $m$ and volume $V$ all right:
$$C_i = frac{n_i}{V_i} = frac{m_i}{M_iV_i}$$
Analyte doesn't change during the extraction and its molar mass $M$ remains the same $(M_i = text{const})$ so the distribution coefficient $D$ can be rewritten as such:
$$D = frac{C_mathrm{s}}{C_mathrm{w}} = frac{m_mathrm{s}V_mathrm{w}}{m_mathrm{w}V_mathrm{s}}$$
where "s" refers to the solvent phase and "w" to aqueous phase.
At equilibrium
$$m_mathrm{w} = m_0 - m_mathrm{s}$$
where $m_0$ is the initial mass of the analyte.
Finally, the distribution coefficient is
$$D = frac{m_mathrm{s}V_mathrm{w}}{(m_0 - m_mathrm{s})V_mathrm{s}} = frac{pu{0.0376 g}cdotpu{150 mL}}{(pu{0.192 g} - pu{0.0376 g})cdotpu{50 mL}} = 0.731$$
answered 1 hour ago
andseliskandselisk
16.6k654115
$endgroup$
add a comment |
Your Answer
StackExchange.ifUsing("editor", function () {
return StackExchange.using("mathjaxEditing", function () {
StackExchange.MarkdownEditor.creationCallbacks.add(function (editor, postfix) {
StackExchange.mathjaxEditing.prepareWmdForMathJax(editor, postfix, [["$", "$"], ["\\(","\\)"]]);
});
});
}, "mathjax-editing");
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "431"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Molly Hahn is a new contributor. Be nice, and check out our Code of Conduct.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fchemistry.stackexchange.com%2fquestions%2f110002%2fdistribution-coeffecient-without-concentrations%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
$begingroup$
Molar concentration can be expressed via mass $m$ and volume $V$ all right:
$$C_i = frac{n_i}{V_i} = frac{m_i}{M_iV_i}$$
Analyte doesn't change during the extraction and its molar mass $M$ remains the same $(M_i = text{const})$ so the distribution coefficient $D$ can be rewritten as such:
$$D = frac{C_mathrm{s}}{C_mathrm{w}} = frac{m_mathrm{s}V_mathrm{w}}{m_mathrm{w}V_mathrm{s}}$$
where "s" refers to the solvent phase and "w" to aqueous phase.
At equilibrium
$$m_mathrm{w} = m_0 - m_mathrm{s}$$
where $m_0$ is the initial mass of the analyte.
Finally, the distribution coefficient is
$$D = frac{m_mathrm{s}V_mathrm{w}}{(m_0 - m_mathrm{s})V_mathrm{s}} = frac{pu{0.0376 g}cdotpu{150 mL}}{(pu{0.192 g} - pu{0.0376 g})cdotpu{50 mL}} = 0.731$$
answered 1 hour ago
andseliskandselisk
16.6k654115
$endgroup$
add a comment |
$begingroup$
Molar concentration can be expressed via mass $m$ and volume $V$ all right:
$$C_i = frac{n_i}{V_i} = frac{m_i}{M_iV_i}$$
Analyte doesn't change during the extraction and its molar mass $M$ remains the same $(M_i = text{const})$ so the distribution coefficient $D$ can be rewritten as such:
$$D = frac{C_mathrm{s}}{C_mathrm{w}} = frac{m_mathrm{s}V_mathrm{w}}{m_mathrm{w}V_mathrm{s}}$$
where "s" refers to the solvent phase and "w" to aqueous phase.
At equilibrium
$$m_mathrm{w} = m_0 - m_mathrm{s}$$
where $m_0$ is the initial mass of the analyte.
Finally, the distribution coefficient is
$$D = frac{m_mathrm{s}V_mathrm{w}}{(m_0 - m_mathrm{s})V_mathrm{s}} = frac{pu{0.0376 g}cdotpu{150 mL}}{(pu{0.192 g} - pu{0.0376 g})cdotpu{50 mL}} = 0.731$$
answered 1 hour ago
andseliskandselisk
16.6k654115
$endgroup$
add a comment |
$begingroup$
Molar concentration can be expressed via mass $m$ and volume $V$ all right:
$$C_i = frac{n_i}{V_i} = frac{m_i}{M_iV_i}$$
Analyte doesn't change during the extraction and its molar mass $M$ remains the same $(M_i = text{const})$ so the distribution coefficient $D$ can be rewritten as such:
$$D = frac{C_mathrm{s}}{C_mathrm{w}} = frac{m_mathrm{s}V_mathrm{w}}{m_mathrm{w}V_mathrm{s}}$$
where "s" refers to the solvent phase and "w" to aqueous phase.
At equilibrium
$$m_mathrm{w} = m_0 - m_mathrm{s}$$
where $m_0$ is the initial mass of the analyte.
Finally, the distribution coefficient is
$$D = frac{m_mathrm{s}V_mathrm{w}}{(m_0 - m_mathrm{s})V_mathrm{s}} = frac{pu{0.0376 g}cdotpu{150 mL}}{(pu{0.192 g} - pu{0.0376 g})cdotpu{50 mL}} = 0.731$$
answered 1 hour ago
andseliskandselisk
16.6k654115
$endgroup$
Molar concentration can be expressed via mass $m$ and volume $V$ all right:
$$C_i = frac{n_i}{V_i} = frac{m_i}{M_iV_i}$$
Analyte doesn't change during the extraction and its molar mass $M$ remains the same $(M_i = text{const})$ so the distribution coefficient $D$ can be rewritten as such:
$$D = frac{C_mathrm{s}}{C_mathrm{w}} = frac{m_mathrm{s}V_mathrm{w}}{m_mathrm{w}V_mathrm{s}}$$
where "s" refers to the solvent phase and "w" to aqueous phase.
At equilibrium
$$m_mathrm{w} = m_0 - m_mathrm{s}$$
where $m_0$ is the initial mass of the analyte.
Finally, the distribution coefficient is
$$D = frac{m_mathrm{s}V_mathrm{w}}{(m_0 - m_mathrm{s})V_mathrm{s}} = frac{pu{0.0376 g}cdotpu{150 mL}}{(pu{0.192 g} - pu{0.0376 g})cdotpu{50 mL}} = 0.731$$
answered 1 hour ago
andseliskandselisk
16.6k654115
answered 1 hour ago
andseliskandselisk
16.6k654115
answered 1 hour ago
andseliskandselisk
16.6k654115
answered 1 hour ago
andseliskandselisk
16.6k654115
16.6k654115
add a comment |
add a comment |
Molly Hahn is a new contributor. Be nice, and check out our Code of Conduct.
Molly Hahn is a new contributor. Be nice, and check out our Code of Conduct.
Molly Hahn is a new contributor. Be nice, and check out our Code of Conduct.
Molly Hahn is a new contributor. Be nice, and check out our Code of Conduct.
Thanks for contributing an answer to Chemistry Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
Use MathJax to format equations. MathJax reference.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fchemistry.stackexchange.com%2fquestions%2f110002%2fdistribution-coeffecient-without-concentrations%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
